ABSTRACT
Defining and visualizing the three-dimensional (3D) structures of pharmaceuticals provides a new and important tool to elucidate the phenomenal behavior and underlying mechanisms of drug delivery systems. The mechanism of drug release from complex structured dosage forms, such as bilayer osmotic pump tablets, has not been investigated widely for most solid 3D structures. In this study, bilayer osmotic pump tablets undergoing dissolution, as well as after dissolution in a desiccated solid state were examined, and visualized by synchrotron radiation micro-computed tomography (SR-μCT). In situ formed 3D structures at different in vitro drug release states were characterized comprehensively. A distinct movement pattern of NaCl crystals from the push layer to the drug layer was observed, beneath the semi-permeable coating in the desiccated tablet samples. The 3D structures at different dissolution time revealed that the pushing upsurge in the bilayer osmotic pump tablet was directed via peripheral "roadways". Typically, different regions of the osmotic front, infiltration region, and dormant region were classified in the push layer during the dissolution of drug from tablet samples. According to the observed 3D microstructures, a "subterranean river model" for the drug release mechanism has been defined to explain the drug release mechanism.
ABSTRACT
Changes in structure of oral solid dosage forms (OSDF) elementally determine the drug release and its therapeutic effects. In this research, synchrotron radiation X-ray micro-computed tomography was utilized to visualize the 3D structure of enteric coated pellets recovered from the gastrointestinal tract of rats. The structures of pellets in solid state and in vitro compendium media were measured. Pellets in vivo underwent morphological and structural changes which differed significantly from those in vitro compendium media. Thus, optimizations of the dissolution media were performed to mimic the appropriate in vivo conditions by introducing pepsin and glass microspheres in media. The sphericity, pellet volume, pore volume and porosity of the in vivo esomeprazole magnesium pellets in stomach for 2 h were recorded 0.47, 1.55 × 108 μm3, 0.44 × 108 μm3 and 27.6%, respectively. After adding pepsin and glass microspheres, the above parameters in vitro reached to 0.44, 1.64 × 108 μm3, 0.38 × 108 μm3 and 23.0%, respectively. Omeprazole magnesium pellets behaved similarly. The structural features of pellets between in vitro media and in vivo condition were bridged successfully in terms of 3D structures to ensure better design, characterization and quality control of advanced OSDF.
ABSTRACT
Cyclodextrin metal-organic framework (CD-MOF) as a highly porous supramolecular carrier could be one of the solutions to the insolubility of isosteviol (STV). The solubility of STV was lower than 20.00 ng/mL at pH 1.0 and pH 4.5, whilst its solubility increased to 20,074.30 ng/mL at pH 6.8 and 129.58 ng/mL in water with a significant pH-dependence. The
ABSTRACT
Metal-organic frameworks (MOFs), comprised of organic ligands and metal ions/metal clusters
ABSTRACT
Tremendous efforts have been devoted to the enhancement of drug solubility using nanotechnologies, but few of them are capable to produce drug particles with sizes less than a few nanometers. This challenge has been addressed here by using biocompatible versatile -cyclodextrin (-CD) metal-organic framework (CD-MOF) large molecular cages in which azilsartan (AZL) was successfully confined producing clusters in the nanometer range. This strategy allowed to improve the bioavailability of AZL in Sprague-Dawley rats by 9.7-fold after loading into CD-MOF. The apparent solubility of AZL/CD-MOF was enhanced by 340-fold when compared to the pure drug. Based on molecular modeling, a dual molecular mechanism of nanoclusterization and complexation of AZL inside the CD-MOF cages was proposed, which was confirmed by small angle X-ray scattering (SAXS) and synchrotron radiation-Fourier transform infrared spectroscopy (SR-FTIR) techniques. In a typical cage-like unit of CD-MOF, three molecules of AZL were included by the -CD pairs, whilst other three AZL molecules formed a nanocluster inside the 1.7 nm sized cavity surrounded by six -CDs. This research demonstrates a dual molecular mechanism of complexation and nanoclusterization in CD-MOF leading to significant improvement in the bioavailability of insoluble drugs.
ABSTRACT
Objective:To analyze the understanding of "informed consent" in clinical treatment of medical staff in institutions with different nature , understand the current situation of informed consent in clinical treatment and further analyze its progress and deficiency .Methods:Using a self-developed questionnaire , a survey was conduc-ted among 326 medical staff in institutions with different nature in Shanghai .Results:In aspect of informing , the choices of medical staff in specific content of clinical treatment and informed objects differed significantly ( P<0 .05 ) .In aspect of voluntary , the medical staff ' s choices on whether patients or their families could refuse doc-tor's treatment differed significantly (P<0.05).In aspect of decision -making capacity, the medical staff's choices in assessment experience , methods, the necessity of assessment and how to assess differed significantly ( P<0.05).Conclusion:At present, the differences of understanding of medical staff from institutions with different nature towards informed consent were more significant .Although medical staff ' s awareness and understanding of informed consent has increased , but the specific operation mode and process need further training and improve-ment.
ABSTRACT
Objective:To analyze the understanding of "informed consent" in clinical treatment of medical staff in institutions with different nature , understand the current situation of informed consent in clinical treatment and further analyze its progress and deficiency .Methods:Using a self-developed questionnaire , a survey was conduc-ted among 326 medical staff in institutions with different nature in Shanghai .Results:In aspect of informing , the choices of medical staff in specific content of clinical treatment and informed objects differed significantly ( P<0 .05 ) .In aspect of voluntary , the medical staff ' s choices on whether patients or their families could refuse doc-tor's treatment differed significantly (P<0.05).In aspect of decision -making capacity, the medical staff's choices in assessment experience , methods, the necessity of assessment and how to assess differed significantly ( P<0.05).Conclusion:At present, the differences of understanding of medical staff from institutions with different nature towards informed consent were more significant .Although medical staff ' s awareness and understanding of informed consent has increased , but the specific operation mode and process need further training and improve-ment.
ABSTRACT
In an answer to the challenge of enzymatic instability and low oral bioavailability of proteins/peptides, a new type of drug-delivery vesicle has been developed. The preparation, based on sodium dodecyl sulfate (SDS) and β-cyclodextrin (β-CD) embedded in chitosan gel, was used to successfully deliver the model drug-insulin. The self-assembled SDS/β-CD vesicles were prepared and characterized by particle size, zeta potential, appearance, microscopic morphology and entrapment efficiency. In addition, both the interaction of insulin with vesicles and the stability of insulin loaded in vesicles in the presence of pepsin were investigated. The vesicles were crosslinked into thermo-sensitive chitosan/β-glycerol phosphate solution for an in-situ gel to enhance the dilution stability. The in vitro release characteristics of insulin from gels in media at different pH values were investigated. The insulin loaded vesicles-chitosan hydrogel (IVG) improved the dilution stability of the vesicles and provided pH-selective sustained release compared with insulin solution-chitosan hydrogel (ISG). In vitro, IVG exhibited slow release in acidic solution and relatively quick release in neutral solutions to provide drug efficacy. In simulated digestive fluid, IVG showed better sustained release and insulin protection properties compared with ISG. Thus IVG might improve the stability of insulin during its transport in vivo and contribute to the bioavailability and therapeutic effect of insulin.
ABSTRACT
The association rate constant and dissociation rate constant are important parameters of the drug-cyclodextrin supermolecule systems, which determine the dissociation of drugs from the complex and the further in vivo absorption of drugs. However, the current studies of drug-cyclodextrin interactions mostly focus on the thermodynamic parameter of equilibrium constants (K). In this paper, a method based on quantitative high performance affinity chromatography coupled with mass spectrometry was developed to determine the apparent dissociation rate constant (k(off,app)) of drug-cyclodextrin supermolecule systems. This method was employed to measure the k(off,app) of meloxicam and acetaminophen. Firstly, chromatographic peaks of drugs and non-retained solute (uracil) on β-cyclodextrin column at different flow rates were acquired, and the retention time and variance values were obtained via the fitting the peaks. Then, the plate heights of drugs (H(R)) and uracil (H(M,C)) were calculated. The plate height of theoretical non-retained solute (H(M,T)) was calculated based on the differences of diffusion coefficient and the stagnant mobile phase mass transfer between drugs and uracil. Finally, the k(off,app) was calculated from the slope of the regression equation between (H(R)-H(M,T)) and uk/(1+k)2, (0.13 ± 0.00) s(-1) and (4.83 ± 0.10) s(-1) for meloxicam and acetaminophen (control drug), respectively. In addition, the apparent association rate constant (k(on,app)) was also calculated through the product of K (12.53 L x mol(-1)) and k(off,app). In summary, it has been proved that the method established in our study was simple, efficiently fast and reproducible for investigation on the kinetics of drug-cyclodextrin interactions.
ABSTRACT
The shape and structure of granules are controlled by the granulation process, which is one of the main factors to determine the nature of the solid dosage forms. In this article, three kinds of granules of a traditional Chinese medicine for improving appetite and promoting digestion, namely, Jianwei Granules, were prepared using granulation technologies as pendular granulation, high speed stirring granulation, and fluidized bed granulation and the powder properties of them were investigated. Meanwhile, synchrotron radiation X-ray computed micro tomography (SR-µCT) was applied to quantitatively determine the irregular internal structures of the granules. The three-dimensional (3D) structure models were obtained by 3D reconstruction, which were more accurately to characterize the three-dimensional structures of the particles through the quantitative data. The models were also used to quantitatively compare the structural differences of granules prepared by different granulation processes with the same formula, so as to characterize how the production process plays a role in the pharmaceutical behaviors of the granules. To focus on the irregularity of the particle structure, the box counting method was used to calculate the fractal dimensions of the granules. The results showed that the fractal dimension is more sensitive to reflect the minor differences in the structure features than the conventional parameters, and capable to specifically distinct granules in structure. It is proved that the fractal dimension could quantitatively characterize the structural information of irregular granules. It is the first time suggested by our research that the fractal dimension difference (Df,c) between two fractal dimension parameters, namely, the volume matrix fractal dimension and the surface matrix fractal dimension, is a new index to characterize granules with irregular structures and evaluate the effects of production processes on the structures of granules as a new indicator for the granulating process control and optimization.
ABSTRACT
The present study establishes a visualization method for the measurement of the distribution and localization of protein/peptide constituents within a single poly-lactide-co-glycolide (PLGA) microsphere using synchrotron radiation-based Fourier-transform infrared spectromicroscopy (SR-FTIR). The representative infrared wavenumbers specific for protein/peptide (Exenatide) and excipient (PLGA) were identified and chemical maps at the single microsphere level were generated by measuring and plotting the intensity of these specific bands. For quantitative analysis of the distribution within microspheres, Matlab software was used to transform the map file into a 3D matrix and the matrix values specific for the drug and excipient were extracted. Comparison of the normalized SR-FTIR maps of PLGA and Exenatide indicated that PLGA was uniformly distributed, while Exenatide was relatively non-uniformly distributed in the microspheres. In conclusion, SR-FTIR is a rapid, nondestructive and sensitive detection technology to provide the distribution of chemical constituents and functional groups in microparticles and microspheres.
ABSTRACT
The secretion of melatonin (MT) is obviously different in the younger and the senior sectors of the population, and the maximum plasma concentration of seniors is only half of that in the younger population group. If exogenous MT can be supplied to senior citizens based on the secretion rate and amount of endogenous MT in the younger population by a bio-mimetic drug delivery system (DDS), an improved therapeutic effect and reduced side effects can be expected. Based upon this hypothesis, the pharmacokinetic parameters of MT, namely, the absorption rate constant (k a), the elimination rate constant (k e), and the ratio of absorption rate (F) to the apparent volume of distribution (V) were obtained by a residual method depending on the plasma concentration curve of immediate release preparations in the healthy younger population. The dose-division method was applied to calculate the cumulative release profiles of MT achieved by oral administration of a controlled release drug delivery system (DDS) to generate plasma MT profiles similar to the physiological level-time profiles. The in vivo release of MT deduced from the healthy younger population physiological MT profiles as the pharmacokinetic output of the bio-mimetic DDS showed a two-phase profile with two different zero order release rates, namely, 4.919 μg/h during 0-4 h (r=0.9992), and 11.097 μg/h during 4-12 h (r=0.9886), respectively. Since the osmotic pump type of DDS generally exhibits a good correlation between in vivo and in vitro release behaviors, an osmotic pump controlled delivery system was designed in combination with dry coating technology targeting on the cumulative release characteristics to mimic the physiological MT profiles in the healthy younger population. The high similarity between the experimental drug release profiles and the theoretical profiles (similarity factor f 2>50) and the high correlation between the predicted plasma concentration profiles and the theoretical plasma concentration profiles (r=0.9366, 0.9163, 0.9264) indicated that a prototype bio-mimetic drug delivery system of MT was established. The similarity factors between the experimental drug release profiles and the theoretical release profile were all larger than 50 both in periods of 0-4 h and 4-12 h, namely, 68.8 and 57.3 for the first batch (Batch No. 20131031), 76.7 and 50.2 for the second batch (Batch No. 20131101), and 73.7 and 51.1 for the third batch (Batch No. 20131126), respectively. The correlation coefficients between the predicted plasma concentration profiles based on the release profiles of the bio-mimetic DDS and physiological profiles were 0.9366 (Batch No. 20131031), 0.9163 (Batch No. 20131101), 0.9264 (Batch No. 20131126), respectively. Since the pharmacokinetic profile of MT in any kind of animal differs markedly from that of human beings, it is impossible to test the bio-mimetic DDS in animals directly. Therefore, the predicted pharmacokinetic profile based upon the in vitro release kinetics is an acceptable surrogate for the conventional animal test. In this research, a bio-mimetic DDS for replacement of MT was designed with in silico evaluation.
ABSTRACT
Paracetamol was used as a model drug in this study to investigate the synergetic effects of lipid coating and beta-cyclodextrin (beta-CD) inclusion for masking the bitter taste of poorly soluble drugs. To control the concentration as low as possible of the free drug which produced a bitter taste, a kinetic model was established to calculate the drug distribution theoretically among the free drug in medium, lipid coated particles and molecular inclusion on the basis of the preparation and characterization of the lipid microspheres, so as to select the proper amount of beta-CD. Finally, the synergetic drug delivery systems were prepared and characterized by 1H nuclear magnetic resonance (1H NMR), molecular simulation and the electronic tongue. As a result, the drug release rate constant (k) of the lipid microspheres coated with octadecanol was determined as 0.001 270 s(-1). Then, the synergetic drug delivery systems were prepared with the ratio of 6.74 : 1 (w/w) for beta-CD and paracetamol. The chemical shift values for the fingerprint peaks of paracetamol all increased and hydrogen bonds were formed between the oxygen on the phenolic hydroxyl group, the nitrogen on the imino in paracetamol and the hydrogens on the hydroxyl groups in beta-CD. The results tested by the electronic tongue indicated that the paracetamol, lipid microspheres, beta-CD inclusion and their mixture showed different taste characteristics, with the bitterness order of the synergetic drug delivery systems approximately lipid microspheres < beta-CD inclusion < paracetamol, which confirmed the synergetic taste masking effects of lipid coating and beta-CD molecular inclusion. In summary, the synergetic taste masking was jointly achieved through the retard of the drug release by the lipid coating and the inclusion of the free paracetamol by beta-CD through hydrogen bonds.
ABSTRACT
The release behavior of single pellet was investigated by LC/MS/MS method with tamsulosin hydrochloride (TSH) as the model drug of the research and then the pellets were divided into four groups according to the drug loading. Comparison of dissolution profiles of each group and capsule were performed using f1 and f2 factor methods to study the difference and similarity. The release profiles of single pellet, each group and capsule were analyzed using principle component analysis (PCA). The particle system was built through Matlab to get the target release profile. The result of this research demonstrated the release behavior of single pellet correlated well with the drug loading. While the dissolution profile of capsule as a reference, the similarity factor of dissolution profiles of the lower drug loading groups were 62.2, 67.1, 53.9, respectively and, 43.3 for highest drug loading group. The particle systems with different pellet distribution and same release profiles were built through release behavior of single pellet. It is of significance to investigate the release behavior of single pellets for studying the release regularity of multiple-unit drug delivery system.
ABSTRACT
In this paper, chloramphenicol was selected as a model drug to prepare in situ gels. The intrinsic dissolution rate of chloramphenicol from in situ gel was evaluated using the surface dissolution imaging system. The results indicated that intrinsic dissolution rate of chloramphenicol thermosensitive in situ gel decreased significantly when the poloxamer concentration increased. The addition of the thickener reduced the intrinsic dissolution rate of chloramphenicol thermosensitive gel, wherein carbomer had the most impact. Different dilution ratios of simulated tear fluid greatly affected gel temperature, and had little influence on the intrinsic dissolution rate of chloramphenicol from the thermosensitive in situ gel. The pH of simulated tear fluid had little influence on the intrinsic dissolution rate of chloramphenicol thermosensitive in situ gel. For the pH sensitive in situ gel, the dissolution rates of chloramphenicol in weak acidic and neutral simulated tear fluids were slower than that in weak alkaline simulated tear fluid. In conclusion, the intrinsic dissolution of chloramphenicol from in situ gel was dependent on formulation and physiological factors. With advantages of small volume sample required and rapid detection, the UV imaging method can be an efficient tool for the evaluation of drug release characteristics of ophthalmic in situ gel.
ABSTRACT
The crystal form of solid substance had intrinsic correlation with its three dimensional crystal morphology. Based on the characterization of the three dimensional crystal morphology of clopidogrel bisulfate, this research is to establish a model based on the three dimensional morphological parameters. The granular samples composed of polymorphs of clopidogrel bisulfate and microcrystalline cellulose (MCC) were scanned by synchrotron radiation X-ray microscopic CT technology (SR-microCT) and the three dimensional structural models for which were constructed. Seven groups of three dimensional morphological parameters were calculated. Finally, the mathematical model was established with the multi-layer perception (MLP) artificial neutral network methods to identify and predict the polymorphs of clopidogrel bisulfate. The success rate of the model prediction for the polymorphs of clopidogrel bisulfate was 92.7% and the area under the ROC curve was 96.2%. The polymorphs of drugs could be identified and predicted through the numerical description of the three dimensional morphology. The volume, number of the vertices and the surface area were the major determinants for the identification of the polymorphs of clopidogrel bisulfate.
ABSTRACT
The purpose of this study is to investigate the applicability of a natural swelling matrix derived from boat-fruited sterculia seed (SMS) as the propellant of osmotic pump tablets. The sugar components, static swelling, water uptake and viscosity of SMS were determined and compared with that of polythylene oxide (WSR-N10 and WSR-303). Both ribavirin and glipizide were used as water-soluble and water-insoluble model drugs. Then, the monolayer osmotic pump tablets of ribavirin and the bilayer osmotic pump tablets of glipizide were prepared using SMS as the osmotically active substance and propellant. SMS was mainly composed of rhamnose, arabinose, xylose and galactose and exhibited relatively high swelling ability. The area of the disintegrated matrix tablet was 20.1 times as that at initial after swelling for 600 s. SMS swelled rapidly and was fully swelled (0.5%) in aqueous solution with relative low viscosity (3.66 +/- 0.03) mPa x s at 25 degrees C. The monolayer osmotic pump tablets of ribavirin and the bilayer osmotic pump tablets of glipizide using SMS as propellant exhibited typical drug release features of osmotic pumps. In conclusion, the swelling matrix derived from boat-fruited sterculia seed, with low viscosity and high swelling, is a potential propellant in the application of osmotic pump tablets.
ABSTRACT
Based on the principle of non-covalent interactions between oligopeptides and paclitaxel for improving the solubility of paclitaxel, an oligopeptide, N terminal-W(L)-FFGREKD-C terminal (W8), was designed and the solubilization effect of W8 on paclitaxel was detected through experiments. The binding efficiency and the possible optimal conformation were optimized by molecular docking program. The solubilization effect of W8 on paclitaxel was determined by RP-HPLC. And the solubilization mechanism of oligopeptide to paclitaxel was proposed at molecular level. It was indicated from the docking result that there existed pi-pi interactions and several hydrogen-bond interactions between the oligopeptide and paclitaxel. After being solubilized by the oligopeptide, the aqueous solubility of paclitaxel was increased to 28 times. This study provided basis for further research of the solubilization of paclitaxel by oligopeptide and confirmed a novel approach for the design of safe oligopeptide solubilizing excipient.
ABSTRACT
The paper is aimed to provide a novel index, named as multidimensional spatial triangular area, for the evaluation of the release-absorption correlation of multiple component traditional Chinese medicines (TCMs). The applicability of the method was demonstrated by the example data. The method and standard practice for evaluation of the release-absorption correlation for western medicines with single compound could not be applied to TCMs with multiple components. The release percentage or absorption percentage of the multiple components for TCMs at the sampling time was a point in the multidimensional space. The area of the triangle formed byt the sequential three points rrepresented the changing characteristics of the components' release and absorption kinetics. The side lengths of the triangle could be calculated from the spatial distances between each two of the sequential three points. Then the triangle area could be obtained by the side lengths. The in vitro release-in vivo absorption correlation of the multiple components could be represented by the correlation between the integrating values of the release triangle areas and that of the absorption triangle areas. The results of the examples indicated that the multidimensional spatial triangular area method could treat the multiple components in a holistic way, in line with the holism the hi he TCMs. Therefore, the multidimensional spatial triangular area method provided new methodology for the release-absorption correlation of the TCMs with multiple components.
ABSTRACT
Objective To investigate a way of early diagnosis for pancreatic cancer. Methods The clinical data of 135 patients with were retrospected and 28cases in them were analyzed. Results 124 patients were for surgical resection, 11 patients were in traditional Chinese medicine ,suiting the remedy to the case ,sustaining, et al. Apart from some patients were relivend, prognosis of all patients were worse , patient,s condition of most cases had promptly worsend. living time was 3-6 monthes, 11.5 monthes averagely. Conclusion Taking early stage diagnosis seriously was key to solve pacretic cancer.